How to Fix DRIVER POWER STATE FAILURE Error in Windows

The DRIVER POWER STATE FAILURE error is a type of Blue Screen of Death (BSOD) that often appears on Windows devices. It’s typically related to driver issues, especially those handling power management, and commonly occurs when the device enters sleep mode or shuts down. In this guide, we'll walk you through steps to fix this error and restore system stability.

What Causes the DRIVER POWER STATE FAILURE Error?

The primary causes of the DRIVER POWER STATE FAILURE error include:

  • Driver conflicts: Incorrect or outdated drivers can lead to system failures.
  • Power management issues: Power-saving settings can cause driver malfunctions, especially when the device goes into sleep mode.
  • Hardware issues: If a driver cannot communicate properly with hardware, it may also trigger this error.

How to Fix DRIVER POWER STATE FAILURE Error

1. Update Device Drivers

The simplest way to prevent this error is to ensure all drivers on your system are updated. Here’s how:

  1. Open Device Manager. You can do this by pressing Win + X and selecting Device Manager from the list.
  2. Look for devices with outdated or problematic drivers (they may be marked with a yellow exclamation point).
  3. Right-click the device and select Update driver.

2. Disable Sleep and Hibernate Modes

Power management issues can be caused by energy-saving settings. Try disabling sleep and hibernation modes:

  1. Open the Control Panel and go to Power Options.
  2. Select Edit Plan Settings and turn off sleep and hibernate modes.

3. Run a System Diagnostic

Windows provides a built-in tool for diagnosing and fixing issues. To run it:

  1. Press Win + R, type cmd, and open the command prompt as an administrator.
  2. Type sfc /scannow and wait for the scan to finish. This tool will automatically fix any detected issues.

4. Check BIOS Configuration

Driver errors can sometimes stem from BIOS settings, especially those related to power management. Try updating your BIOS to the latest version or resetting it to default settings:

  1. Restart your computer and enter BIOS (this is usually done by pressing Delete or F2, depending on your computer model).
  2. In the power settings section, disable Deep Sleep or similar options, if available.
  3. Save the changes and restart your device.

5. Reinstall Windows (As a Last Resort)

If none of the above methods work, the issue might lie within Windows system files, which could require a full system reinstall:

  1. Back up all important data.
  2. Use a Windows installation disc or USB drive to perform a clean installation.