How to Fix "USB Device Over Current Status Detected" Error on Computer Startup

If you see the error "USB Device Over Current Status Detected" when starting your computer, it indicates an issue with the USB ports or connected devices. This error occurs when one of the USB ports is drawing more power than allowed, or there is a short circuit. Let's explore the potential causes of this issue and how to fix it.

Main Causes of the Error

  • Faulty USB port: Physical damage or a short circuit inside the port may cause the power draw to exceed safe limits.
  • Damaged USB device: The connected device could be faulty or have a damaged cable.
  • BIOS settings issues: Incorrect BIOS settings may cause problems with the USB controller's operation.
  • Damaged motherboard: Issues with the electrical circuits or short circuits on the motherboard could also trigger this error.

How to Fix the "USB Device Over Current Status Detected" Error

1. Disconnect All USB Devices

Start by unplugging all USB devices (mouse, keyboard, flash drives, etc.). Try turning on your computer without them. If the error goes away, one of your devices is likely the cause. Reconnect them one at a time to identify the faulty one.

2. Inspect USB Ports

Examine the USB ports for damage. Sometimes, the contacts inside the port can get bent or shorted. If you notice any issues, carefully straighten the pins or replace the port if necessary.

3. Reset BIOS Settings

Try resetting the BIOS to its default settings. To do this, enter the BIOS setup during startup (usually by pressing the Delete or F2 key) and select Load Default Settings or Load Optimized Defaults. Save the changes and reboot the computer.

4. Inspect the Motherboard

If the issue persists, disconnect all cables and examine the motherboard. Look for damaged capacitors or signs of short circuits. If any issues are found, you may need to replace the damaged components or seek professional repair.

5. Update BIOS

Sometimes the problem may be caused by outdated BIOS firmware. Visit the manufacturer's website for your motherboard and download the latest BIOS version. Follow the manufacturer's instructions to update your BIOS.

Additional Tips

  • Consider using a surge protector or an uninterruptible power supply (UPS) to prevent voltage spikes.
  • Avoid connecting cheap or low-quality USB devices, as they may cause short circuits.
  • If the error continues to appear, consider replacing the motherboard if all other solutions fail.